Suggested for Dry Products Only
Using PSF-1 cap seals is the a most cost effective way to increase consumer confidence compared to Heat Induction Seals because PSF-1 seals do not require additional equipment but are tamper evident. Comprised of polystyrene foam with a foil liner, these pressure sensitive seals are easy to apply and seal to most container materials with varying degrees of adhesion. PSF-1 seals are a standard .020 inch thick and come in black text reads Sealed For Freshness.
Seal is created by torque of cap activating adhesive by applying pressure where the liner meets the bottle neck. No heat induction equipment required. Sealing properties should be checked after 12-24 hours. Liners should be tested for compatibility of both size, design, material of bottle/cap, and product.
Pres-On’s cap liner materials and size offerings are compatible for most bottle & cap sizes/designs, and products, however it remains the responsibility of the end user to confirm if the liner is suitable for the intended use
Product Information: PSF-1
Top Layer: Polystyrene Foam: .020”
Printed Top Layer: Sealed For Freshness
Bottom Layer: Foil: Pressure Sensitive Adhesive
Total: .020” +/- 10%
Sizes (Pre-Cut): standard cap sizes ranging from 18mm to 120mm are readily available and cut to order. We do have custom sizes available and also offer tri-tab cuts, single-tabs and washers in varying OD/ID.
Special Print: custom print on top side is available, minimums do apply and typically start at 2,700 square yards. E.g. a 120mm PSF-1 with custom print would have a minimum order quantity (MOQ) of 148,000 pre-cut liners.
Pres-On’s cap liner materials and size offerings are compatible for most bottle & cap sizes/designs, and products, however it remains the responsibility of the end user to confirm if the liner is suitable for the intended use
Return & Refund Policy:
Purchaser may not return any product without Seller’s consent. Returned goods shipments must be prepaid.
Shipping Information:
Seller reserves the right to under-ship or over-ship by 10% due to yield (+/- 10%).
Unless otherwise noted, all applicable freight, fuel surcharge fees, carton charges and handling charges are not included in this price quotation and will be invoiced as a separate line item after the is invoiced by the carrier. Seller shall have sole discretion to select carrier and mode of shipment. All products are F.O.B. (E.X.W. for international) unless otherwise specified in the applicable Proposal, Quote, Order Acknowledgement, or Invoice issued by Seller. Regardless of shipping terms or freight payment, all risk of loss or damage in transit shall be borne by Purchaser.
LEGAL DISCLAIMER
IN NO EVENT WILL PRES-ON OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES, CLAIMS, OR LOSSES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, LOST PROFITS AND/OR LOST OPPORTUNITIES) RESULTING FROM OR RELATED TO THIS PRODUCT OR THE USE, MISUSE, PURCHASE, OR SALE OF THIS PRODUCT, WHETHER BASED ON WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY, WHETHER OR NOT FORESEEABLE, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any specifications, instructions, or other information provided by Pres-On in connection with this product are provided for informational purposes only and shall not be deemed to impose any representations, warranties, covenants or other obligations upon Pres-On or any of its affiliates.